Add a Comment

Comment by gino guilliano on November 15, 2011 at 20:48

quillo que a pasau,cuentamelo bro,roto otraves no .

Comment by tuggy on November 15, 2011 at 14:05

3 pin what..??? the diff....yes they should be the same...

 

Comment by morgan on November 15, 2011 at 12:18

Tuggy the flange on my one is a 3 pin whereas on the spare its a 4pin will the internals be the same

Comment by tuggy on November 15, 2011 at 9:54

sounds like you bust a half shaft it will be the long one and it will have snapped at the diff, you can just pull the half shaft and get a long piece of rod with a magnet taped to the end and pull the broken bit out then with your other axle remove the good shaft and put it in,,,30 min job lot less hassle that changing axles,,,,,and bleeding brakes ect,,,,

Comment by morgan on November 14, 2011 at 11:34

The new transferbox has no centre diff, just hi and low gear, we got off the rear propshaft and found out i could turn the flange on the axle with my hand which i supose means the pinion or other bits inside needs replacing which is not good!!!! so decided to change the whole of the rear axle.....out of action for a bit!!!!!

Comment by Alfred Balban on November 13, 2011 at 18:31

We could not get to engage the diff lock on the thing,looks like Morgan changed the transmission box and did not check if it was working or its missing something.

Comment by tuggy on November 13, 2011 at 17:07

oh dear,,,,you got home then,,,,